Atm Clear And Show Commands - Enterasys X-Pedition XSR CLI Cli Reference Manual

ppp timeout retry
This command sets the maximum time to wait for a response during PPP negotiation. It requires a
properly configured ATM sub‐interface specifying encapsulation type PPPoA or PPPoE.
Syntax
ppp timeout retry <seconds>
seconds
Syntax of the "no" Form
The no form of this command returns this parameter to its default setting:
no ppp timeout retry
Mode
ATM Sub‐Interface configuration:
Default
3 seconds
Example
This example resets the maximum wait time for a response during PPP negotiation to 12 seconds:
XSR(config-if<ATM0/1/0.1>)#ppp timeout retry 12

ATM Clear and Show Commands

clear counters atm
This command clears ATM counters for the ATM interface.
Syntax
clear counters atm {slot/card/port}
slot
card
port
Mode
Privileged EXEC:
The peak wait interval, ranging from 1 to 255 seconds.
XSR(config-if<ATMx/x/x.x>)#
The XSR slot number, ranging from 0 to 2.
The XSR NIM number, ranging from 1 to 2.
The XSR slot number: 0. The sub‐interface number ranges from 1 to 30.
XSR#
ATM Clear and Show Commands
XSR CLI Reference Guide 13-103