Enterasys X-Pedition XSR CLI Cli Reference Manual page 679

Mode
EXEC or Privileged EXEC Mode:
Sample Output
The following output displays
Filter
Name
noICMP
show ip firewall network
This static counter shows all network objects configured. If a network object name is specified
then only that object is displayed.
Syntax
show ip firewall network [name]
Mode
EXEC or Privileged EXEC Mode:
Sample Output
This output displays a network object for the Engineering firewall in the 192.168.100.0/24 range:
Name
Engineering
show ip firewall network-group
This static counter shows all network group objects. If a network group object is also specified
then only that network group is displayed.
Syntax
show ip firewall network-group [name]
Mode
EXEC or Privileged EXEC Mode:
Source Destination
Network Network
dmz private
Start Address
192.168.100.1
Note: Although ANY_INTERNAL and ANY_EXTERNAL objects do not display when this command is
entered, entering show ip firewall ANY_INTERNAL or ANY_EXTERNAL will display the
members of these intrinsic groups.
XSR> or XSR#
Protocol
Name/Number
ICMP
XSR> or XSR#
End Address
192.168.100.254 internal
XSR> or XSR#
Firewall Show Commands
ICMP Bi/Log
Type
N/A Y/N
Internal/External
XSR CLI Reference Guide 16-135