Triggered on Demand RIP Commands
Rcvd:
Compr. RTP
Compr. UDP
Full Header
Errors
Dropped
Total Pkts
Bytes Rcvd
Bytes Saved
Efficiency Improve
Sent
Compr. RTP
Compr. UDP
Full Header
Rejected IP
Rejected non RTP
Total Pkts
Bytes Rcvd
Bytes Saved
Efficiency Improve
Misses
Hit ratio
Triggered on Demand RIP Commands
The following commands are subsets of triggered RIP functionality:
•
ip rip max-retransmissions -
page 190 for the command definition.
ip rip polling-interval
•
page 191 for the command definition.
5-142 Configuring the Internet Protocol
Number of compressed RTP packets.
Number of compressed UDP packets.
Number of full header packets received.
Number of packets that cannot be un‐compressed because it is out
of sequence, indicating that one or more packets have been lost on
the link.
Packets whose IP, Port or SSRC does not match that in the received
context. These packets are dropped
Total number of packets received for RTP de‐compression
Total number of bytes received for RTP de‐compression
Number of bytes saved due to RTP compression.
Efficiency Improvement ratio. Equals (Bytes of actual packet +
bytes received) / Bytes Received
Number of compressed RTP packets.
Number of compressed UDP packets. Potential RTP packets with
changing x,p and pt fields are sent compressed UDP.
Number of full header packets sent.
Total number of packets that cannot be compressed by RTP
compression. These include fragmented packets and packets with
IP option fields. These packets are sent uncompressed.
Total number of non RTP packets (RTP version not equal to 2, RTP
header length exceeding payload length, SSRC does not match that
stored in the TX context. These packets are sent uncompressed.
Total number of packets sent.
Total number of bytes sent.
Number of bytes saved because of compression.
Efficiency Improvement ratio. Equals (Bytes saved + bytes sent)/
Bytes Sent.
Number of RTP packets that fails to compress because of no free
compression context
Packets compressed successfully/total packets.
Specifies the maximum number of retransmissions. Refer to
‐ Specifies the polling interval for triggered RIP requests. Refer to