Enterasys X-Pedition XSR CLI Cli Reference Manual page 33

Syntax of the "no" Form
The no form of this command offers no contact information:
no snmp-server contact
Mode
Global configuration:
Default
Null string
Example
XSR(config)#snmp-server contact LarryCurtis@enterasys.com
XSR(config)#snmp-server contact "Larry Curtis 508 767-2536"
snmp-server enable/disable
This command enables or disables the SNMP server. If the server is disabled, using any snmp CLI
command will turn it back on.
Syntax
snmp-server {enable | disable}
enable
disable
Mode
Global configuration:
Default
Disable
snmp-server enable traps
This command enables traps and informs to be sent. SNMPv1 traps and v3 informs are supported,
They are sent to the hosts configured with the
Syntax
snmp-server enable traps [[snmp [authentication]] entity | frame-relay | bgp |
ospf]
snmp
authentication
entity
frame-relay
bgp
ospf
XSR(config)#
Enables the SNMP server.
Disables the SNMP server.
XSR(config)#
Enables all SNMP traps.
Enables authentication traps only.
Enables all entity traps.
Enables all Frame Relay traps.
Enables all BGP traps.
Enables all OSPF traps.
snmp-server host command.
snmp-server Commands
XSR CLI Reference Guide 1-19