Table of Contents
Advertisement
Observing Syntax and Conventions
The CLI Syntax and conventions use the notation described in the following table.
Convention
xyz
[x]
[x | y | z]
{x | y | z}
[x {y | z} ]
(config-if<xx>)
Next Mode entries display the CLI prompt after a command is entered.
Sub-command
soho.enterasys.com
The following set of commands allows you to define security features for the XSR, including:
•
"General Security Commands" on page 16‐84
•
"Security Clear and Show Commands" on page 16‐91
•
"AAA Commands" on page 16‐93
•
"AAA Usergroup Commands" on page 16‐94
•
"AAA User Commands" on page 16‐97
•
"AAA Method Commands" on page 16‐101
•
"AAA Per‐Interface Commands" on page 16‐111
•
"AAA Debug and Show Commands" on page 16‐112
•
"Firewall Feature Set Commands" on page 16‐115
•
"Firewall Interface Commands" on page 16‐129
•
"Firewall Show Commands" on page 16‐133
Description
Key word or mandatory parameters (bold)
[ ] Square brackets indicate an optional parameter (italic)
[ | ] Square brackets with vertical bar indicate a choice of values
{ | } Braces with vertical bar indicate a choice of a required value
[{ | } ] Combination of square brackets with braces and vertical bars indicates a
required choice of an optional parameter
xx signifies the interface type and number; e.g., F1, G3, S2/1.0,M57. F indicates
a FastEthernet, and G a GigabitEthernet interface.
headings are displayed in red, italicized text.
Italicized, non-syntactic text indicates either a user-specified entry or text with
special emphasis
Configuring Security
XSR CLI Reference Guide 16-83
16
Advertisement
Table of Contents
