Display Parameters
Network
Next Hop
Metric
LocPrf
Weight
Path
The following is sample output from the command:
XSR#show ip bgp 55.5.5.0/24
BGP routing table entry for 55.5.5.0 255.255.255.0
Paths: (2 available, learned over EBGP)
AS Path 200, Aggregator 500
Next Hop 52.52.52.3 from 52.52.52.3 (52.52.52.3)
Origin ?, localpref 200, weight 100, atomic, valid
BGP routing table entry for 55.5.5.0 255.255.255.0
Paths: (2 available, best #1, learned over EBGP)
AS Path 300
Next Hop 192.168.72.100 from 192.168.72.100 (192.168.72.100)
Origin ?, localpref 300, med 0, weight 100, valid, best
show ip bgp community
This command displays routes associated with BGP communities.
Syntax
show ip bgp community community-number | internet | local-AS | no-export | no-
advertise
community-number
internet
local-AS
no-export
no-advertise
Mode
EXEC configuration:
Example
The following is sample output from the command:
IP address of destination network.
IP address of the next hop to the destination network.
Value of Multi‐Exit Descriminator.
Value of Local Preference.
Weight of the route.
AS path to the destination network.
1.2.3.4
Community number, ranging from 1 to 4,294,967,295.
Well‐known Internet community.
Well‐known community specifying that routes with this value should
not be sent outside a local AS.
Well‐known community specifying that routes with this value should
not be advertised outside a BGP confederation boundary.
Well‐known community specifying that routes with this value should
not be advertised to any other.
XSR>
BGP Clear and Show Commands
XSR CLI Reference Guide 6-125