Table of Contents
Advertisement
4 transitions from LISTEN to SYN-RCVD
2 transitions from SYN-SENT or SYN-RCVD to CLOSED
2 transitions from ESTABLISHED or CLOSE-WAIT to CLOSE
Parameter Description
Connection state - Possible states for a TCP connection:
LISTEN
SYNSENT
SYNRCVD
ESTAB
FINWAIT1
FINWAIT2
CLOSEWAIT
CLOSING
LASTACK
TIMEWAIT
CLOSED
Local address
Foreign address
Retransmission timeout
telnet ip_address
This command supports Telnetting to another server.
Syntax
telnet ip_address [port value]
ip_address
value
Mode
Privileged EXEC:
Waiting for a connection request.
Waiting for a matching connection request after having sent a
connection request.
Waiting for a confirming connection request ack after having both
received and sent a connection request.
Indicates an open connection.
Waiting for a connection termination request from the remote TCP host
or an ack of the connection termination request previously sent.
Waiting for a connection termination request from the remote TCP host.
Waiting for a connection termination request from local user.
Waiting for a connection termination request ACK from the remote
TCP host.
Waiting for an ack of the connection termination request previously
sent to the remote TCP host.
Waiting for enough time to pass to be sure the remote TCP host has
received the ack of its connection termination request.
Indicates no connection state at all.
IP address and port of the network server.
IP address and port of the connected remote host .
Retransmission interval of TCP packets that were not acknowledged
are waiting for retransmission.
IP address of the server you are Telnetting to.
Port number of the Telnet server. Range: from 0 to 65,535.
XSR#
IP Clear and Show Commands
XSR CLI Reference Guide 5-181
Advertisement
Table of Contents
