Table of Contents
Advertisement
username
This command adds a user, privilege level, password, and encryption type for those accessing the
XSR. Assigning privilege levels lets you control which users can manage selective resources. The
username
usernames with particular configuration modes. For example, if configuring T1/E1 requires that a
user have a privilege level of 6 or higher, any user with a privilege of 5 or lower would be
prohibited from configuring the T1/E1 controller.
Admin/Administrative Users
There is a special level 15 user called admin for which you can set a password by specifying admin
name as a user. The default password for admin is null (that is, the zero length string "").
Any user with a privilege of 15 is considered an administrator. In at least one of the five permitted
Telnet/SSH sessions, an administrative user must be logged. If the first four sessions are in use by
regular users, then the fifth session will only allow an administrator to login, otherwise any user
can login to the fifth session. If one of the first four sessions has an administrator logged in
already, then the fifth session can be any user. This rule is meant to ensure that the administrator
can always login.
The
show running-config
client
database.
Syntax
username name [privilege level] password {cleartext | secret type} password
name
privilege
level
password
cleartext
secret
type
password
Syntax of the "no" Form
The no form of this command deletes a user. If no user exists, the command will be ignored. Also,
this command will remove the admin user provided it is issued by another administrator.
no username name
command can also be used in conjunction with the
Caution: We recommend that you add no more than 3000 users due to a size limit for the the
user.dat file. Also, we suggest keeping usernames and passwords as short as possible to avoid
breaching the 200 Kbyte limit.
command displays user information. By contrast, consult the
command which configures a user with AAA security by the XSR authentication
User ID.
Associates a priority level with this user.
Priority associated with this user, ranging from 0 to 15 (highest). If the privilege
is changed while the XSR is being set, the change occurs immediately.
Associates a password with this username.
Password will not be encrypted.
Password will be encrypted.
0 indicates the password is expected to be unencrypted, 5 indicates the input
password is expected to be encrypted already, so it will not be encrypted again.
The password associated with the specified user ID. Users are stored in the
startup-config
If you choose a secret password with an optional parameter of 5, then you must
provide the password in encrypted form.
file.
General Network Management Commands
privilege
command to associate
XSR CLI Reference Guide 1-13
aaa
Advertisement
Table of Contents
