Enterasys X-Pedition XSR CLI Cli Reference Manual page 624

DHCP Clear and Show Commands
show ip dhcp binding
This command displays active address bindings on the DHCP server. If the address is not
specified, all address bindings are shown. Otherwise, only the binding for the specified client is
displayed. The lease expiration time can be displayed based on the Universal Time Clock (UTC) or
local clock. If the local clock is not specified, UTC is the default.
Syntax
show ip dhcp binding [ip-address][utc | local]
ip-address
utc
local
Mode
Privileged EXEC or Global configuration:
Examples
The following examples display the lease expiration in default UTC time:
XSR#show ip dhcp binding 168.16.22.11
IP address
168.16.1.11
XSR#show ip dhcp binding 168.16.22.254
IP address
168.16.3.254 02c7.f800.0423
The following example displays the lease expiration in local time:
XSR#show ip dhcp binding local
IP address
11.1.0.253
The following example displays the lease expiration in UTC time:
#show ip dhcp binding UTC
XSR
IP address
11.1.0.253
The following example displaysthe lease expiration of DHCP client 11.1.0.253 in UTC time:
XSR#show ip dhcp binding UTC 11.1.0.253
IP address
15-114 Configuring DHCP
Note: BOOTP bindings do not have leases: their Active designation is always N.
IP address of the DHCP client.
Bindings displayed according to the Universal Time Clock.
Bindings displayed according to local time.
Hardware address
00a0.9802.32df
Hardware address
Hardware address
0002.2ab4.4b01
Hardware address
0002.2ab4.4b01
Hardware address
XSR# or XSR(config)#
Lease expiration
Feb 01 1998 12:00AM
Lease expiration
Infinite
Lease expiration
JUL 19 2003 09:07PM
Lease expiration
JUL 19 2003 05:07PM
Lease expiration
Type Act.
Automatic Y
Type ACT.
Manual N
Type Act.
Automatic Y
Type Act.
Automatic Y
Type Act.