Enterasys X-Pedition XSR CLI Cli Reference Manual page 430

Frame Relay Clear and Show Commands
Parameter Descriptions
LMI
Status Enq. Sent
Status Msgs Rcvd
Status Timeouts
Update Status Rcvd
Invalid L2 LMI info
Invalid L3 LMI
Un‐configured DLCIs List of un‐configured DLCIs are reported to be in an Active state by the Frame Relay
Down DLCIs
Interface
Local/net sequence
number
show frame-relay map
This command displays data from current frame‐relay map entries.
Syntax
show frame-relay map
Mode
EXEC or Global configuration:
Sample Output
The following example displays a multi‐point Frame Relay map:
XSR#show frame-relay map
Frame Relay Map Statistics (Serial 2/0)
Serial 2/0.1
Serial 2/0.1
Serial 2/0.1
Serial 2/0.1
Serial 2/0.1
9-106 Configuring Frame Relay
The configured or auto‐detected LMI type. If the port is set for AUTO LMI, then the XSR
shows AUTO (nn), where nn is ILMI, ANSI, or ITU if the port has successfully negotiated/
detected the LMI supported by the switch, otherwise it displays AUTO.
Sum of LMI status enquiry messages sent.
Sum of LMI status messages received.
Sum of times the status message was not received within the keepalive time value.
Sum of LMI asynchronous update status messages received.
Sum of received LMI messages with invalid unnumbered information field.
Sum of LMI messages with invalid fields.fields
switch. This field is not displayed if the configured LMI type is None.
List of configured DLCIs are reported to be in a Down or Inactive state by the Frame Relay
switch. This field is not displayed if the configured LMI type is None.
Down marks the port as active but not communicating with the switch; Inactive marks the
port as shut down; Up marks the port as operational.
Value of current or next to transmit/received LMI control packet.
dlci 973 (0x3CD, 0xF0D0)
gratuitous-inverse-arp, bootp, static ip
dlci 972 (0x3CC, 0xF0C0)
gratuitous-inverse-arp, static ip
dlci 971 (0x3CB, 0xF0B0)
static ip
dlci 970 (0x3CA, 0xF0A0)
gratuitous-inverse-arp
dlci 960 (0x3C0, 0xF000)
XSR> or XSR(config)#
Remote Addr.
Remote Addr.
Remote Addr.
Remote Addr.
Remote Addr.
10.10.10.5,
10.10.10.4,
10.10.10.3,
un-resolved,
un-resolved