Enterasys X-Pedition XSR CLI Cli Reference Manual page 56

SLA Agent Commands
Syntax of the "no" Form
The no form of this command returns to the default value:
no timeout
Mode
RTR Echo configuration:
Default
5000 milliseconds
Example
The following example resets the RTR timeout to 500 milliseconds:
XSR(config-rtr-echo-57)#timeout 500
type
This command specifies the type of Response Time Reporter (RTR) measurement to be performed
‐ ICMP Echo ‐ as well as the destination and source host IP addresses.
Syntax
type {echo} protocol {ipIcmpEcho} dst [source-ipaddr src]
dst
src
Mode
RTR configuration:
Next Mode
RTR Echo configuration:
Example
The following example sets the RTR type and acquires RTR Echo mode:
XSR(config-rtr-57)#type echo protocol ipIcmpEcho 192.168.57.3
XSR(config-rtr-echo-57)
1-42 Network Management
XSR(config-rtr-echo-xx)#
IP address of the destination host.
IP address used as the source.
XSR(config-rtr-xx)
XSR(config-rtr-echo-xx)