Sla Agent Commands - Enterasys X-Pedition XSR CLI Cli Reference Manual

User name: authprivUser
Engine ID: 800015f8030001f423e691
storage-type: nonvolatile
Parameter Description
storage-type
show snmp view
This command displays information on each SNMP view in the group username table.
Syntax
show snmp view
Mode
Privileged EXEC: XSR#
Sample Output
The following is sample output from the command:
XSR#show snmp view
viewname:
viewname:
viewname:

SLA Agent Commands

aggregate period
This command specifies the period between two aggregate measurement action intervals by the
Response Time Reporter (RTR).
Indicates whether the settings have been saved to persistent memory
(non‐volatile) or will be lost if the device is reset (volatile).
v3view
included:
internet
excluded:
v1default
included:
internet
excluded:
snmpUsmMIB
snmpVacmMIB
MIBIIview
included:
1.3.6.1
excluded:
group: v3RWGroup
active
SLA Agent Commands
XSR CLI Reference Guide 1-37