Aaa Usergroup Commands - Enterasys X-Pedition XSR CLI Cli Reference Manual

AAA Usergroup Commands

Mode
Global configuration:
Examples
The following example configures the Telnet sub‐system to use the AAA sub‐system:
XSR(config)#aaa client telnet
The following example configures the SSH sub‐system to accept AAA:
XSR(config)#aaa client ssh
AAA Usergroup Commands
aaa group
This command adds a local user group and acquires Usergroup configuration mode. Each user
defined in the node must belong to one group only. The following sub‐commands are available in
Usergroup mode:
• dns server
definition.
ip pool
•
page 16‐95 for the command definition.
• pptp encrypt mppe
the command definition.
• privilege
• wins server
definition.
Syntax
aaa group group-name
group-name
Syntax of the "no" Form
The no form of this command deletes the group:
no aaa group group-name
Default
There is a default group named DEFAULT.
Mode
Global configuration:
Next Mode
Usergroup configuration:
16-94 Configuring Security
XSR(config)#
‐ Sets the address of DNS servers. Refer to page 16‐95 for the command
‐ Links a globally defined pool of IP addresses to the user group. Refer to
‐ Enables MPPE encoding on a PPTP connection. Refer to page 16‐96 for
‐ Sets the privilege level of a user. Refer to page 16‐101 for the command definition.
‐ Sets the address of WINS servers. Refer to page 16‐97 for the command
Name of the group.
XSR(config)#
XSR(aaa-group)#