Enterasys X-Pedition XSR CLI Cli Reference Manual page 45

Mode
Global configuration:
Examples
The following example creates a view of all objects on the XSR:
XSR(config)#snmp-server view v3view internet included
The following example creates a view of all objects in the MIB‐II subtree:
XSR(config)#snmp-server view mib2 mib-2 included
The following example creates a view for TCP:
XSR(config)#snmp-server view TCPview tcp included
The following example creates a view of all objects in the MIB‐II subtree excluding 1.3.6.1:
XSR(config)#snmp-server view MIBIIview 1.3.6.1 excluded
The following example removes a view of MIN‐II subtree 1.3.6.1:
XSR(config)#no snmp-server view 1.3.6.1
The following example creates a view of all objects in private Enterasys and Cabletron MIBs
except for the etsysConfigurationChange MIB:
XSR(config)#snmp-server view Enterasys private included
XSR(config)#snmp-server view Enterasys etsysConfigurationChangeMIB excluded
Sample Output
The following is sample output from the command:
XSR#show snmp view
viewname:
included:
excluded:
Table 1-2 MIB Names for SNMP View Commands
SNMP Term
org
dod
internet
mgmt
private
snmpV2
mib‐2
system
interfaces
ifEntry
XSR(config)#
Enterasys
private
etsysConfigurationChangeMIB
SNMP Numerical ID
1.3
1.3.6
1.3.6.1
1.3.6.1.2
1.3.6.1.4
1.3.6.1.6
1.3.6.1.2.1
1.3.6.1.2.1.1
1.3.6.1.2.1.2
1.3.6.1.2.1.2.2.1
snmp-server Commands
XSR CLI Reference Guide 1-31