Enterasys X-Pedition XSR CLI Cli Reference Manual page 34

snmp-server Commands
Syntax of the "no" Form
The no form of this command disables the sending of specified traps:
no snmp-server enable traps [[snmp [authentication]] entity | frame-relay]
Mode
Global configuration:
Default
Disabled
Examples
To enable all SNMP traps, enter the following command:
XSR(config)#snmp-server enable traps snmp
To enable authentication SNMP traps only, enter the following command:
XSR(config)#snmp-server enable traps snmp authentication
snmp-server engineID
This command specifies a value for the SNMP engine on the XSR. Within SNMP v3, users are
localized to the device by this Engine ID.
A textual convention for SnmpEngineID is specified by RFC‐3411. Using this textual convention,
the Engine ID is created with the MAC address and enterprise number for Enterasys. In order to
transmit v3 informs, the XSR requires the engineIDs of remote SNMP entities which this
command allows you to configure. The command also lets you configure the XSR local engineID.
All engineID settings must be set before adding users to the User Security Model (USM) table
since user keys are localized with the engineID.
Syntax
snmp-server engineID [local | remote ip-addr {udp-port port}] engineid-string
local
remote
ip-addr
port
engineid-
string
Syntax of the "no" Form
Use the no form of this command to remove the engineID:
no snmp-server engineID [local | remote ip-addr {udp-port port}] engineid-string
1-20 Network Management
XSR(config)#
Caution: If you want to change the engine ID, do so before adding SNMP v3 users because you
cannot delete a user which is associated with a discarded Engine ID. But you can delete an SNMP
user when the Engine ID it is associated with still exists.
The engine‐ID is for the local SNMP agent.
The engine‐ID is for the remote SNMP agent.
The IP address of the remote host.
The UDP port of the remote IP address.
A unique hexadecimal string used to set the local engine ID according to the
algorithm defined in RFC‐3411. The string must be an even number of up to
54 hex characters.