Enterasys X-Pedition XSR CLI Cli Reference Manual page 640

AAA Usergroup Commands
Syntax of the "no" Form
The no form unlinks a pool of addresses from a group of users:
no ip pool pool-name
Mode
Usergroup configuration:
Example
The following example adds the IP pool denver:
XSR(config)#aaa group headquarters
XSR(aaa-group)#ip pool denver
pptp encrypt mppe
This command enables Microsoft Point‐to‐Point Encryption (MPPE) on a PPTP connection. The
command must be added to the interface that will carry PPTP‐MPPE traffic. All Windows clients
using MPPE require MS‐CHAP.
Syntax
pptp encrypt mppe {auto | 40 | 128}
auto
40
128
Syntax of the "no" Form
The no form of this command disables MPPE encryption:
no pptp encrypt mppe
Default
128‐bit encryption
Mode
Usergroup configuration:
Example
The following example enables MPPE with auto encryption:
XSR(config)#aaa group
XSR(aaa-group)#pptp encrypt mppe auto
16-96 Configuring Security
XSR(aaa-group)#
Note: All configurable MPPE options must be identical on both tunnel endpoints.
Offers 40‐ and 128‐bit encryption strength if available.
Only 40‐bit encryption allowed.
Only 128‐bit encryption allowed.
XSR(aaa-group)#