Table of Contents
Advertisement
Syntax
auth-port port-number
port-number
Syntax of the "no" Form
The no form of this command resets to the default port number ‐ 1645:
no auth-port
Default
The default authorization port number is 1645.
Mode
AAA Method configuration:
Example
The following example resets the UDP authentication port to 5000:
XSR(config)#aaa method radius sbr default
XSR(aaa-method-radius)#auth-port 5000
backup
This command creates a name for a backup RADIUS server. The RADIUS backup method does
not permit loops. That is, method 1 can have a backup method 2 but its backup method 3 cannot
back up method 1. Be aware that when the primary RADIUS server fails and AAA switches to the
backup, use of the primary server will not automatically be restored when it comes back on line.
You must manually restart the primary server with the
Syntax
backup name
name
Syntax of the "no" Form
The no form of this command deletes the backup RADIUS server:
no backup name
Mode
AAA Method configuration:
Example
The following example specifies Radius2 as the backup server name:
XSR(config)#aaa method radius sbr default
XSR(aaa-method-radius)#backup Radius2
Port number for authentication requests, ranging from 0 to 10,000.
XSR(aaa-method-radius)#
Designation of the backup RADIUS server.
XSR(aaa-method-radius)#
AAA Method Commands
aaa method radius
command.
XSR CLI Reference Guide 16-105
Advertisement
Table of Contents
