Table of Contents
Advertisement
police
This command configures traffic policing.
Syntax
police bps [burst-normal][burst-max][conform-action action][exceed-action
action][violate-action action]
bps
burst-normal
burst-max
conform-action
exceed-action
violate-action
action
Syntax of the "no" Form
Traffic policing is removed by using the no form of this command:
no police
Defaults
•
burst‐normal: average rate multiplied by one second)
•
conform‐action: transmit
•
exceed‐action: drop
•
violate‐action: drop
•
Command is disabled by default
Mode
Policy‐Map Class configuration:
Average rate ranging from 1,000 to 100,000,000 bps.
Normal burst size ranging from 1,000 to 51,200,000 bps. If less than 1000
bytes burst‐normal will be set to 1000 bytes.
Excess burst size ranging from 1,000 to 51,2000,000 bytes. Value must be
greater than or equal to normal‐burst size. It will automatically be changed to
the normal‐burst size if less than normal‐burst.
Action to take on packets that conform to the rate limit.
Action to take on packets that exceed the rate limit.
Action to take on packets that violate normal and maximum burst sizes. If
violate‐action is set, the token bucket algorithm will use two token buckets.
Action to take on packets. You may specify one keyword:
drop
•
‐ Drops the packet.
•
set-prec-transmit new-prec
packet.
•
set-dscp-transmit new-prec
point (DSCP) value and sends the packet.
transmit
•
‐ Sends the packet.
XSR(config-pmap-c-<xx>)#
‐ Sets IP precedence and sends the
‐ Sets the differentiated services code
XSR CLI Reference Guide 12-89
Policy-Map Commands
Advertisement
Table of Contents
