Fixing System
Removing the Fixing Assembly
■ Procedure
1.
NOTE:
When the consumable part is replaced, clear the parts counter shown below in the service mode.
• COPIER > COUNTER >DRBL-1 > FX-UNIT
Removing the Fixing Drive Unit
■ Preparation
1.
" Removing the Fixing Assembly" on page 206
2.
" Removing the Rear Cover" on page 113
3.
" Removing the Left Rear Cover" on page 113
4.
"Removing the Inlet Cover" on page 115
5.
" Removing the Main Controller PCB" on page 187
6.
" Removing the Low-Voltage Power Supply PCB" on page 189
■ Procedure
4. Parts Replacement and Cleaning
206