Fixing System; Location; Removing The Fixing Assembly; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly > Procedure

Fixing System

Location

[1]
No. Name Main Unit
[1] Fixing Drive Unit Main Unit
[2] Fixing Assembly Main Unit
4 Disassembly/Assembly > Fixing System > Removing the Fixing Assembly > Procedure
[2]
F-4-160
Reference Adjastment during
parts replacement
(Refer to page
4-81)
(Refer to page
4-79)
T-4-32

Removing the Fixing Assembly

CAUTION:
• Be sure to start removing the Fixing Assembly after it is cooled down enough. The
Fixing Assembly right after printing may cause burn injury.
• Be sure not to disassemble the Fixing Assembly because it requires adjustment.

■ Procedure

● Disassembling Procedure
1) Open the Right Door Unit [1].
4-79
[1]
F-4-161
4-79