Energy Saver - Xerox WorkCentre 5790 User Manual

Power On and Off

Energy Saver

The device is designed to be energy efficient and automatically reduces its power consumption after
periods of inactivity. The System Administrator can set up Energy Saver options. The Energy Saver
button on the control panel causes the Power Down options to be displayed. To activate Energy Saver
mode use the instructions below:
1. Press the Energy Saver button on the control panel.
The Power Down options are displayed.
2. Select Energy Saver. The device will immediately enter
Low Power mode.
If Sleep mode has been configured, the device will
then enter Sleep mode after a specified period of time.
The Energy Saver button is illuminated when the
device is in Energy Saver mode. A steady light indicates
the device is in Low Power mode. A flashing light
indicates the device is in Sleep Mode.
3. To re-activate the device when in Low Power or Sleep mode, touch a button on the touch screen or
control panel. The device takes longer to recover from Sleep mode.
For information about setting up the Energy Saver options, refer to the
18 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Getting Started
System Administrator Guide.