Special Pages; Add Covers - Xerox WorkCentre 5790 User Manual

Special Pages

The Special Pages tab enables you to add, modify, or delete cover pages, inserts, or exception pages.
The table provides a summary of the special pages for
your print job. Up to 250 inserts and exception pages
can be included in the table. You can change the width
of the columns in the table.
To edit, delete or move an entry in the table use the
following buttons:
• Edit you can select single or multiple entries
and use this button to change the properties for
the selected entries.
• Delete is used to delete an individual entry or a
selection of entries.
• Delete All is used to delete all the entries in the
table.
• Undo is used to undo the last actions if you
make an error.
• Up and Down are used to move the entries up or down in the table.
Some features are only supported by specific printer configurations, operating systems, or driver types.
You may see more features or options listed than your specific device supports.

Add Covers

Use this option to add blank or printed covers to your printed document.
1. To add a cover select the Add Covers button above the table.
2. Select the Cover Options required:
• Front Only provides a front cover.
• Back Only provides a back cover.
• Front and Back: Same provides a front and back cover
with the same settings, on the same media.
• Front and Back: Different provides a front and back cover with individual programing
requirements and on different media if required.
3. Select the Paper Settings for the selected cover options.
4. Select the printing options:
• Blank or Preprinted inserts a blank or pre-printed sheet and does not print an image.
• Printed uses the first page of the document to print the front cover (if selected), and the last
page to print the back cover (if selected).
5. Select OK to save your selections and exit.
The cover details display in the table.
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Special Pages

159
Print