Introduction - Xerox WorkCentre 5790 User Manual

Introduction

Introduction

ID Card Copy enables you to scan each side of an ID card
onto one side of a single sheet of paper. The ID card is
placed on the document glass and the first side is scanned.
When prompted, the card is turned over and the other side
is scanned. You can also set different image quality settings
for side 1 and side 2.
1. To select the ID Card Copy service, press the Services
Home button.
2. Select the ID Card Copy option. Additional options
and features are displayed.
Most feature screens include the following buttons to
confirm or cancel your choices.
• Undo resets the current screen to the values that
were displayed when the screen was opened.
• Cancel resets the screen and returns to the previous screen.
• Save saves the selections made and returns to the previous screen.
• Close closes the screen and returns to the previous screen.
If an option is not required, use the Off option to disable a feature.
If Authentication or Accounting has been enabled on your device you may have to enter log in details
to access the features. Refer to
200 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
ID Card Copy
Log In / Out on page 32 of Getting Started.