Page Layout Options - Xerox WorkCentre 5790 User Manual

Layout/Watermark
• Booklet Margins control whether the Booklet Layout feature fits the virtual pages into the
printable area of the sheet, or into the full physical size of the sheet. Standard ensures the entire
image fits on two pages per sheet, even if the original document has little or no white space
around the edges. None assumes the original document has enough white space around all the
borders to fit two pages per sheet, for example if printing two 8.5x11" images on 11x17" paper (or
two A4 images on A3 paper).
• Gutter use this option to shift the images to create a center margin for the booklet. This option
provides space for the booklet center fold. Specify the horizontal distance (in points) between the
page images. (A point is 1/72" or .35 mm.)
• Creep this option gradually shifts the images throughout the document, providing less shift in the
center of the booklet and more shift to the outer pages of the booklet. This is useful for booklets
with more than 10 pages. Specify how much the page images are shifted outward (in 10ths of a
point).
Note: Some media types, sizes, and weights cannot be stapled, punched, or folded. Refer to
www.xerox.com for specifications information. If your document is already formatted as a
booklet, do not select Booklet Layout.

Page Layout Options

If the orientation is not already set in your application, select the orientation from the first drop-down
menu.
• Portrait prints the text and images across the shortest dimension of the paper.
• Landscape prints the text and images across the longest dimension of the paper.
• Rotated Landscape places the landscape text and image upside down (rotates the text and
image 180 degrees).
Select the sides printed option required from the second drop-down menu.
• 1-Sided Print prints on one side of the paper or transparency. Use this option when printing on
transparencies, envelopes, or labels.
• 2-Sided Print prints on both sides of a sheet of paper with the images printed so the job can be
bound on the long edge of the sheet.
• 2-Sided Print, Flip on Short Edge prints on both sides of a sheet of paper with the images printed
so the job can be bound on the short edge of the sheet.
Note: You can also select these options on the Paper/Output tab for 2-Sided Printing.
If you select multiple pages per sheet for Pages Per Sheet or Booklet Layout select one of the following
options from the third drop-down menu.
• No Page Borders does not print a border around each page.
• Draw Page Borders prints a border around each page.
164 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Print