Loading Trays 3 And 4 - Xerox WorkCentre 5790 User Manual

Trays 3 and 4

Loading Trays 3 and 4

Only A4 or 8.5x11" LEF sized media can be loaded. The media size and type requested must be loaded
in the tray and the settings cannot be adjusted by the user.
Note: Your device does not warn you if the wrong sized media is loaded.
CAUTION: A problem may occur if a tray is opened while it is being used to feed media.
1. Opening the tray automatically lowers an elevator in
the base of the tray.
2. The media required is displayed on the screen. Ensure
the correct media is loaded.
3. Place the media in the tray. Media must be positioned
against the left side of the tray.
• Load pre-printed paper face-down and with the
top towards the front of the device.
• Load hole punched paper with the holes on the
left edge.
Paper must not be loaded above the maximum fill line.
4. Close the paper tray. When the tray is closed the elevator rises to feed the media.
226 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Paper and Media