Inserts - Xerox WorkCentre 5790 User Manual

5. Select the Printing Options required for the selected covers:
• Blank provides a blank sheet as the cover.
• 1 Sided prints an image on one side of the cover.
• 2 Sided prints an image on both sides of the cover.
• 2 Sided, Rotate Side 2 prints an image on both sides of the cover. The image on the second
side is rotated to change the read orientation.
6. Select the Paper Supply required for the selected covers.
7. Select Save to confirm your selections.
8. Load your originals into the document feeder and select Start to run the job.

Inserts

Inserts enables blank pages on a different media to be inserted into your document, or for specified
pages to be printed on a different media. Up to two sources of media can be used for the inserts. If
inserting blank pages, a blank sheet must be inserted in the appropriate place in your original
document prior to scanning.
If you have a High Volume Finisher and the optional Tray 6 (Inserter) installed, you can feed the inserts
from this tray. Media loaded into Tray 6 (Inserter) is not part of the printing process, therefore blank
pages do not need to be added to your original document. When entering the insert page numbers,
the insert sheets are counted as a page.
Note: Inserts cannot be used with Auto Paper Supply, a paper supply must be specified.
Use the following instructions to program Inserts.
1. On the Copy tab, select the paper you want to use for the main body of the job.
2. Load the media to be used for the inserts into another paper tray, ensuring that it is in the same
orientation as the paper you are using for the main body of your job.
Note: For further information about loading media, refer to
Update the Paper Settings screen and Confirm your selections.
3. If blank inserts are required, add blank sheets to your set of originals where the inserts are to be
placed.
4. Select Inserts from the Output Format tab.
5. Select On to enable inserts.
Paper and Media
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Output Format
on page 219.
57
Copy