Introduction - Xerox WorkCentre 5790 User Manual

Introduction

Introduction

Reprint Saved Jobs is a standard feature that can be
enabled on your device. It enables you to retrieve jobs
which have been stored on the device using the Store Job
feature of the Copy service, the print driver or the Internet
Services Print Submission option.
Prior to using the Reprint Saved Jobs option, a job must be
saved to a folder on the device. For instructions on using
the basic Save Job for Reprint features refer to
on page 189.
Jobs are placed into a folder located on the device and can be accessed and retrieved for printing at
later date. Jobs can be recalled and printed as many times as you need.
1. To select the Reprint Saved Jobs service, press the
Services Home button.
2. Select the Reprint Saved Jobs option. Additional
options and features are displayed.
Most feature screens include the following buttons to
confirm or cancel your choices.
• Undo resets the current screen to the values that
were displayed when the screen was opened.
• Cancel resets the screen and returns to the previous screen.
• Save saves the selections made and returns to the previous screen.
• Close closes the screen and returns to the previous screen.
For instructions on using the basic Reprint Saved Jobs features refer to
page 192.
If Authentication or Accounting has been enabled on your device you may have to enter log in details
to access the features. Refer to
188 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Save and Reprint Jobs
Saving a Job
Log In / Out on page 32 of
Reprinting Saved Jobs
Getting Started.
on