Table of Contents
Advertisement
2 Product Overview
Energy Saver Mode
The machine is installed with an Energy Saver feature that will automatically cut off the
electricity to the machine if no copy or print data is received for a certain duration.
The Energy Saver feature has two modes: Low Power mode and Sleep mode.
The machine enters the Low Power mode after the preset time has elapsed if the
machine is left unused for a fixed period of time.
The machine then enters the Sleep mode if a further preset time elapses.
To enter the Energy Saver mode, press the <Energy Saver> button on the control
panel, and then the machine enters the Energy Saver mode straight away.
Low Power Mode
In this mode, the power to the control panel and fuser unit is lowered to save power.
The touch screen goes out, and the <Energy Saver> button on the control panel lights.
To use the machine, press the <Energy Saver> button. The <Energy Saver> button
2
goes out to indicate that the Energy Saver feature is cancelled.
Sleep Mode
In this mode, the power is lowered more than in the Low Power mode.
The touch screen goes out, and the <Energy Saver> button on the control panel lights.
To use the machine, press the <Energy Saver> button. The <Energy Saver> button
goes out to indicate that the Energy Saver feature is cancelled.
Entering the Energy Saver Mode
The following describes how to enter the Energy Saver mode.
1
Press the <Energy Saver> button.
Note
48
• The machine will not enter the Energy
Saver mode while copy or print jobs are in
progress. Press the <Energy Saver>
button after finishing the jobs.
1
2
3
4
5
6
7
8
9
0
#
C
<Energy Saver> button
Advertisement
Table of Contents
