Properties Tab; Description; Energy Saver Settings - Xerox WorkCentre 5022 User Manual

Tab Menu Item
Management
Note Double-byte characters cannot be used in Xerox

Properties Tab

Description

Item
Machine Model
Serial Number
Machine Name
Location
Contact Person
Administrator's E-mail Address
Energy Saver Settings (General Setup)
Note Neither of Low Power mode or Sleep mode can be disabled.
Item
Time to Low Power Mode
Time to Sleep Mode
Apply button
® ®
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide
Add New Name
Import Data
Export Data
Delete All Names
Description
The product name is displayed.
The product serial number is displayed.
You can enter the printer name (up to 32 ASCII code characters excluding
colons (:), equal signs (=), at symbols (@), or asterisks (*), which are not
valid). (Default: "WorkCentre 5022" or "WorkCentre 5024")
You can enter the machine's location (up to 255 ASCII code characters).
You can enter the contact person's information (up to 255 ASCII code
characters).
You can enter the e-mail address of the system administrator (up to 128
characters).
This information is required for sending an e-mail.
Description
You can set the time elapse from the last operation until the machine
enters Low Power mode. You can set a value between 1 and 60 minutes.
(Default: 1)
You can set the time elapse from Low Power mode until the machine enters
Sleep mode. You can set a value between 1 and 239 minutes. (Default: 1)
You can apply changes by pressing this button.
See Page:
P. 2-35
P. 2-35
P. 2-35
P. 2-36
P. 2-36
® ®
CentreWare Internet Services.
Environment Settings
2-21