Job Operation Rights; Configuration Report; Altitude Adjustment; Display Options - Xerox WorkCentre 5790 User Manual

Contention Management
The device is capable of processing several jobs at the same time, such as scanning, sending a fax, and
printing a job. At times, 2 jobs may require the same resource and the contention management system
decides which job has priority. This device enables you to change the priority of print and copy jobs.
• Priority enables you to choose which jobs have priority, Copy or Print jobs. Use the arrow buttons
to set the priority for the Copy Jobs and Print Jobs. Number 1 has the highest priority.
• First In, First Out instructs the device to process jobs based on when they are received. The jobs
are processed in the order they enter the job list.

Job Operation Rights

To delete a job from the Active Jobs list, you must have permission. The feature enables the
Administrator to set the delete permissions.
• Select the All Users button to give all users the right to delete any job in the jobs list.
Select the System Administrator only button to give just the System Administrator rights to
•
delete jobs from the jobs list.

Configuration Report

Provides various options for printing the configuration report when the device is powered on.
• Print Report prints the configuration report on power up.
• Do Not Print Report prevents the configuration report from printing on power up.
• Print Now prints the configuration report immediately.

Altitude Adjustment

The xerographic process used in your device to make prints is affected by air pressure. Air pressure is
determined by the height of the device above sea level. The device will automatically compensate for
differences in air pressure if you input the approximate height of the device above sea level. The
adjustment can be set in meters or feet.

Display Options

The Book Copying, Book Faxing and Booklet Creation features in their default modes assume that the
books and booklets have a reading order of left to right. In some countries the reading order is from
right to left. This utility provides additional options for both features to enable the user to select the
appropriate reading order.
• Book Scan Order if set to On the user of the Book Copying or Book Faxing feature will be able to
choose to scan both pages of a bound original, either left page then right page or right page then
left page.
• Booklet Print Order if set to On the user of the Booklet Creation feature will be able to choose to
print the booklet so that the pages can be read from left to right or from right to left.
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Administration and Accounting
Device Settings
261