Loading Tray 5 - Xerox WorkCentre 5790 User Manual

Tray 5

Loading Tray 5

The media size and type requested must be loaded in the tray and the settings cannot be adjusted by
the user.
Note: Your device does not warn you if the wrong sized media is loaded.
CAUTION: A problem may occur if a tray is opened while it is being used to feed media.
1. Press the button to open the door.
Opening the door automatically lowers an elevator in the base of the tray. Wait for the paper tray
to lower.
2. The media required is displayed on the screen. Ensure the correct media is loaded.
3. Place the media in the tray. Media must be positioned against the right side of the tray.
• Load pre-printed paper face-up and with the top
towards the front of the device.
• Load hole punched paper with the holes on the
right edge.
Paper must not be loaded above the maximum fill line.
4. Close the door.
When the door is closed the elevator rises to feed the
media.
230 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Paper and Media