Cleaning The Device; Document Glass And Constant Velocity Transport Glass - Xerox WorkCentre 5790 User Manual

General Care

Cleaning the Device

WARNING: When cleaning the device do NOT use organic or strong chemical solvents or aerosol
cleaners. Do NOT pour fluids directly onto any area. Use supplies and cleaning materials only as
directed in this documentation. Keep all cleaning materials out of the reach of children.
WARNING: Do not use pressurized air-spray cleaning aids on or in this equipment. Some
pressurized air-spray containers contain explosive mixtures and are not suitable for use in
electrical applications. Use of such cleaners can result in a risk of explosion and fire.

Document Glass and Constant Velocity Transport Glass

To ensure optimum print quality at all times, regularly clean the glass areas of your device. This helps
avoid output with streaks, smears and other marks that may transfer from the glass area when
scanning documents.
When you use the document feeder, your documents will pass over the stationary scanner using the
Constant Velocity Transport glass. Any dirt or marks on this piece of glass will cause lines or streaks on
your copies, faxes or scanned images. Also, any marks or dirt on the Constant Velocity Transport roll
may show through the document and appear on your scanned images.
1. Use a lint-free cloth, lightly dampened with Xerox Anti-
Static or general cleaning fluid or another suitable non-
abrasive glass cleaner to clean the document glass
the Constant Velocity Transport glass
2. Wipe away any residue with a clean cloth or paper towel.
3. Use a lint-free cloth, lightly dampened with water, Xerox
cleaning fluid or Xerox film remove to clean the under side
of the document cover or document feeder
complete circumference of the Constant Velocity Transport
roll .
4
Control Panel, Touch Screen, Document Feeder and Output Trays
Regular cleaning keeps the touch screen, control panel and other device areas free from dust and dirt.
1. Use a soft, lint-free cloth, lightly dampened with water.
2. Wipe clean the entire area of the control panel, including
the touch screen.
3. Wipe clean the document feeder, output trays, paper trays
and other outside areas of your device.
4. Remove any residue with a clean cloth or paper towel.
290 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
General Care and Troubleshooting
and
1
.
2
and the
3
3
4
1
2