Introduction - Xerox WorkCentre 5790 User Manual

Introduction

Introduction

This guide describes the different types of media that can be used in your device, the paper trays
available and the types and sizes of media that can be loaded and fed from each tray. It also identifies
the orientation the media can be loaded, Long Edge Feed (LEF) or Short Edge Feed (SEF).
Detailed media specifications for this device are provided at www.xerox.com.
Paper Tray 1: This tray is standard on the device. It
1
is a fully adjustable tray and is used for media sizes
A5 LEF to A3 SEF (5.5x8.5" LEF to 11x17" SEF). The
capacity for this tray is 500 sheets of 75 gsm or
20 lb paper.
Paper Tray 2: This tray is standard on the device. It
2
is a fully adjustable tray and is used for media sizes
A5 LEF to A3 SEF (5.5x8.5" LEF to 11x17" SEF). The
capacity for this tray is 500 sheets of 75 gsm or
20 lb paper.
Paper Tray 3: This tray is standard on the device. It
3
is a dedicated tray and is set to a fixed size, either
A4 or 8.5x11". The capacity for this tray is
sheets of 75 gsm or 20 lb paper.
Paper Tray 4: This tray is standard on the device. It
4
is a dedicated tray and is set to a fixed size, either
A4 or 8.5x11". The capacity for this tray is
sheets of 75 gsm or 20 lb paper.
The trays automatically detect low media and out of media conditions. A warning message is
displayed on the screen when a tray requires loading.
Always use the information labels in each of the trays for guidance on loading orientations and
maximum fill information.
222 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Paper and Media
7
1
2
5
3
4
2000
1600
6
Tray 5: An optional high capacity paper source
5
which feeds A4 or 8.5x11" Long Edge Feed (LEF)
media as standard. Optional kits are available to
accommodate 11x17", A3, 8.5x14", 8.5x11" or A4
Short Edge Feed (SEF) media. The capacity for this
tray is 4000 sheets of 75 gsm or 20 lb paper (A4 or
8.5x11" LEF), up to 2000 sheets of 75 gsm or 20 lb
paper (optional kits).
Tray 6 (Post Process Inserter): An optional paper
6
tray for use with the High Volume Finisher. It is
used to insert pre-printed sheets into copy sets.
The device cannot print on sheets fed from this
tray. The capacity for this tray is 250 sheets of
75 gsm or 20 lb paper.
Bypass Tray: This tray is also standard on the
7
device and is used for non-standard printing
media. It can be used for media sizes in the range
A6 SEF to A3 SEF (4.25x5.5" SEF to 11x17" SEF).
The capacity for this tray is 100 sheets of 75 gsm
or 20 lb paper.