2-Sided Scanning; Batch Send - Xerox WorkCentre 5790 User Manual

If more than one fax line is available, the following characters are also available:
• Line 1 [<1>] selects line 1 to dial the number. Using the line selection identifier temporarily
overwrites the fax settings and is for the current job only.
• Line 2 [<2>] selects line 2 to dial the number. Using the line selection identifier temporarily
overwrites the fax settings and is for the current job only.
3. When you have entered the fax number and dialing characters required, select Add to add the
number to the Recipient list.
4. Select Close to return to the fax options.

Batch Send

The Batch Send feature allows several fax jobs to be sent to the same destination fax machine during
one transmission. This reduces the connection time and provides a reduced call connection charge.
Batch Send is enabled from Tools. For more information about enabling the Batch Send feature refer to
Batch Send on page 267 of
Once Batch Send has been enabled, it applies to all fax transmissions. Once Batch Send has been
enabled, program your fax job settings as required. To allow other fax jobs to be transmitted with your
job add a delay to the transmission time. For more information refer to
Enter the destination fax number and select the Start button. Your job is submitted to the job list,
ready for transmission. When a new fax job is submitted that has the same destination as the held fax
job, a pop-up message is displayed.
When the delayed time has elapsed, all faxes to the same destination are linked together and
transmitted. All individual fax job settings are maintained, except the communication speed which
uses the speed of the first fax job for the remaining jobs.
Note: If Batch Send is enabled and a delay send job is programmed, any subsequent fax jobs
programmed to send to the same destination will automatically be added to the batch and
delayed until the scheduled time.

2-Sided Scanning

The 2-Sided Scanning option allows you to set whether 1 or 2 sides of your original document are
scanned. Documents must first be loaded in the document feeder to enable the 2 Sided option. The
options are:
• 1-Sided is used if your originals are single-sided.
• 2-Sided is used if your originals are double-sided. The document feeder must be used to scan your
originals with this option.
• 2-Sided, Rotate Side 2 select if your original is double-sided and opens up like a calendar.
Administration and Accounting.
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Delay Send on page 85.
Fax
Fax
75