Image Shift - Xerox WorkCentre 5790 User Manual

The device will identify the size of the original during scanning. If the pages have a black or dark
colored border the device will assume that the pages are smaller than they really are. To overcome this
use the Custom Scan Areas feature in Original Size to enter the exact size of the page. Refer to
Original Size on page 52 for more information.
• Both Pages use to scan both pages, the left page of
the book will be scanned first. Use the arrow buttons to
specify an amount from 0 to 50 mm (0 to 2") to be
deleted from the center of the book in order to delete
unwanted marks reproduced from the gutter of the
book.
• Left then Right or Right then Left is used to scan
both pages, but the pages will be scanned in the order
specified. These options replace the Both Pages option and will not be displayed unless enabled
in Tools. Refer to Display Options
• Left Page Only use to scan the left page only. Use the arrow buttons to specify an amount from 0
to 25mm (0 to 1") to be deleted from the right side of the page in order to delete unwanted marks
reproduced from the gutter of the book.
• Right Page Only use to scan the right page only. Use the arrow buttons to specify an amount
from 0 to 25mm (0 to 1") to be deleted from the left side of the page in order to delete unwanted
marks reproduced from the gutter of the book.
Select Save to save your selections and exit.

Image Shift

Image Shift allows you to move the position of the image on the output page. The options are:
• Auto Center automatically centers the scanned image on the output paper. To work effectively,
the original should be smaller than the selected output media or alternatively, the image should
be reduced.
• Margin Shift moves the image up / down or left / right
on the page to give bigger or smaller margins. Enter
the shift required by selecting a field or use the arrow
buttons.
The amount of shift is in 1 mm (0.1") increments up to
50 mm (2.0").
When copying 2-sided there are two options:
• Adjust the margin of side two independently of
side one.
• Use Mirror Side 1 for side two to mirror the image shift set for side one if a binding margin is
required.
Select Save to save your selections and exit.
on page 261 of Administration and
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Layout Adjustment
Accounting.
Copy
53