Fax Settings - Xerox WorkCentre 5790 User Manual

Service Settings

Fax Settings

Select the Fax Settings option to access the following settings:
• Fax Transmission Defaults
• Fax Country Setting
• Incoming Fax Defaults
• File Management
• Line Setup on page 270
• Fax Report Options
Fax Transmission Defaults
Use these options to set the fax sending defaults.
Automatic Redial Setup
If the device cannot make contact with the destination fax machine, it automatically waits and redials
later. Use this setting to specify the interval between unsuccessful attempts and the number of times
the device redials.
• Redial Time Interval is used to specify the time interval between redials for a failed transmission.
Between 1 and 25 minutes can be entered.
• Automatic Redial Attempts instructs the device how many times to redial the remote fax
machine before rejecting the job. Between 0 and 14 attempts can be entered.
Automatic Resend
If the device connects to the receiving fax machine but the fax transmission is unsuccessful the device
automatically attempts to resend the fax. Use this setting to specify how may attempts should be
made to resend the fax, and which pages should be resent.
• Number of Resends is used to specify how many times the fax is resent. Between 0 and 5 can be
selected.
• Failed page(s) without a Cover Page is selected to resend the failed pages but not the cover page
again.
• Failed page(s) with a Cover Page is selected if only the failed pages should be resent with a cover
page.
• Whole Job without a Cover Page is selected if the entire job should be resent but not the cover
page.
• Whole Job with Cover Page is selected if the whole job, including the cover page should be resent.
266 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Administration and Accounting
on page 266
on page 267
on page 268
on page 269
on page 271