Introduction - Xerox WorkCentre 5790 User Manual

Introduction

Introduction

This section describes the copying features of the device,
including options for Reduce/Enlarge, 2-Sided Copy, Layout
Adjustments, Image Quality, Output Formats, Job
Assembly, and other copy functions.
When Start is pressed from within the copy service, the
device scans your originals and temporarily stores the
images. It then prints the images based on the selections
made.
1. To select the Copy service, press the Services Home
button.
2. Select the Copy option. Additional options and
features are displayed.
For instructions on using the basic Copy features refer to
Making Copies on page 43.
If Authentication or Accounting has been enabled on your
device you may have to enter log in details to access the features. Refer to
Getting Started.
42 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Copy
Log In / Out on page 32 of