Tray 5 - Xerox WorkCentre 5790 User Manual

Tray 5

Tray 5 is an optional high capacity paper source. When
installed, Tray 5 takes priority as the primary paper feeder.
This tray is a dedicated tray and as standard feeds A4 or
8.5x11" Long Edge Feed (LEF) media. Optional kits are
available to accommodate 11x17", A3, 8.5x14", 8.5x11" or
A4 Short Edge Feed (SEF) media. The following media can
be loaded in Tray 5:
• Up to 4000 sheets of 75 gsm or 20 lb paper (A4 or
8.5x11" LEF), up to 2000 sheets of 75 gsm or 20 lb
paper (optional kits).
• Weights from 60 to 216 gsm (16 to 56 lb).
Note: For 80 gsm paper capacities are slightly lower than specified.
• Media types:
• Plain, Bond and Recycled
• Punched
• Letterhead and Pre-printed
• Heavyweight
• Rough Surface
Tray 5 must not be used to feed labels, transparencies, envelopes or tabs. The Bypass Tray can be used
for these media types.
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Tray 5

229
Paper and Media