Saving Jobs For Reprinting - Xerox WorkCentre 5790 User Manual

Saving Jobs for Reprinting

Saving Jobs for Reprinting

1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch the
documents.
Or...........
Lift up the document feeder. Place the document face down onto the document glass and register
it to the arrow at the top right rear corner. Close the document feeder.
2. Press the Clear All (AC) button once to cancel any previous screen programing selections.
3. Press the Services Home button and select the Copy
option.
The Copy features are displayed.
4. Program the required job features.
5. Select the Job Assembly tab, and then Save Job for Reprint.
6. Select the option required:
Copy & Save is used to store the job and print a
•
copy of the job.
• Save Only stores the job without printing.
7. Select a folder location to store the job.
8. Select New Job Name and enter a name for the job
using the keyboard.
Select Save to save the job name and return to the previous screen.
9. Press Start to run the job.
10. The job is scanned and saved with the name entered, in the folder selected. If Copy & Save was
selected, a copy of the job is also printed.
Jobs can also be saved using the print driver options or Internet Services. For additional information
about Saving Jobs for Reprint, refer to
30 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Getting Started
Saving a Job on page 189 of Save and Reprint Jobs.