Xerox WorkCentre 5790 User Manual page 262

Device Settings
Document Feeder Size Sensing
The Document Feeder automatically senses the size of the documents being fed from the input tray so
that features such as Auto Paper selection can be used. It can automatically detect 18 different sizes of
document which includes all the standard sizes the user is likely to use. This feature enables you to set
up the document feeder so that it will detect a different or custom size of document that you may use
regularly.
• To customize the Document Feeder Size Sensing, place the document in the document feeder in
the correct orientation and adjust the guides.
• Select the Document Feeder Size Sensing feature.
The screen displays the default document size detected.
• To change the document size select the size you require from the list. If the size required is not
available, select the Custom Size button and enter the size required. When you have entered the
size of the document, select Save.
Remove the document from the document feeder and then place it back in again. The device
should detect the size of your document and display it on the screen.
262 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Administration and Accounting