Configuring The Local Host Ip Address - 3Com 3C63100-AC-C - PathBuilder S600 Bridge/router Reference Manual

Figure 34 PathBuilder S600 Terminal Access Methods
SNMP
160.160.1.1
160.160.1.3
Telnet
160.160.1.2
SLIP or PPP
SNMP
or
Telnet
160.160.1.4
Configuring the Local Host IP Address
The Local Host IP Address Configuration menu allows you to set parameters for
the management port (Ethernet or SLIP) or the PathBuilder S600.
To enter configure the Ethernet management port, follow these steps:
1 From the Manage IP Network Configuration menu, select [1] Local Host IP
Configuration to display the Local Host IP Configuration menu, shown in
Figure 35.
Figure 35 Local Host IP Configuration Menu
PathBuilder S600
Mgmt
10BaseT
Module
Dialup RS 232
Port Direct
Mask 255.255.255.0
Performing Initial Configuration
SNMP
ATM
160.160.1.5
Telnet
160.160.1.6
RS 232
VT100
9600 Bps
65