Cells transmitted—The number of ATM cells transmitted on the E3 since the last
user reset of this counter.
Cells dropped—The number of idle/unassigned cells encountered and dropped
on the interface.
Cells with HCS errors—The number of header check sequence (HCS) errored
cells encountered on the ATM interface.
Viewing OC3/STM-1 Statistics
You can view the following types of statistics for the OC3/STM-1 UNI Module:
OC3/STM-1 UNI Performance Monitoring (physical monitoring of the line)
n
ATM Statistics (monitoring of the ATM payload)
n
OC3/STM-1 UNI Performance Statistics You can view the following types of
OC3/STM-1 performance statistics:
section
n
line
n
far line
n
path
n
far path
n
Section Performance Monitoring (current, interval, and total)
ES—The number of errored seconds (ESs) encountered by the OC3/STM-1 section.
SES—The number of severely-errored seconds (SESs) encountered by the
OC3/STM-1 section.
SEFS—The number of severely errored framing seconds (SEFSs) encountered by
the OC3/STM-1 section.
CVS—The number of coding violations (CVs) encountered by the OC3/STM-1
section.
LOS—The number of Loss of Signal (LOS) conditions encountered by the
OC3/STM-1 section.
LOF—The number of Loss of Frame (LOF) conditions encountered by the
OC3/STM-1 section.
Line Performance Monitoring (current, interval, and total)
ES—The number of errored seconds (ESs) encountered by the OC3/STM-1 line.
SES—The number of severely-errored seconds (SESs) encountered by the
OC3/STM-1 line.
UAS—The number of unavailable seconds (UASs) encountered by the OC3/STM-1
line.
CVS—The number of coding violations (CVs) encountered by the OC3/STM-1 line.
AIS—The number of Alarm Indicator Signal (AIS) conditions encountered by the
OC3/STM-1 line.
RDI—The number of Remote Defect Indication (RDI) conditions encountered by
the OC3/STM-1 interface. Also known as FERF (Far End Receive Failure). This is the
alarm that is generated when a far end AIS or LOP defect is detected.
Viewing Statistics
205