3Com 3C63100-AC-C - PathBuilder S600 Bridge/router Reference Manual page 133

Figure 94 Add Group Menu (Selecting Group Type)
5 Enter [1] UNI. The Add Group menu appears as shown in Figure 95.
Figure 95 Add Group Menu (Adding UNI Group)
6 Select [1] Set Admin. Port(s). The following prompt appears at the bottom of the
screen:
Enter Admin Port(s) (1..4):
7 Enter the port number of the T1/E1 port you want to include in the UNI group.
8 Select [2] Set Admin. Status and enter [2] to put the group in service.
9 Select [3] Set Number of VPI for VCC and specify the number of distinct VPIs that
can be used for VCCs on this card: 1-256. The remaining VPIs are available for
VPCs.
10 Select [3] Previous Menu.
11 If desired, repeat steps 5-8 to set up a additional UNI groups and put them into
service.
Configuring the DS1 (or E1) UNI with IMA Modules 133