3Com 3C63100-AC-C - PathBuilder S600 Bridge/router Reference Manual page 136

136 C 5: C
HAPTER ONFIGURING
P B S600 M
ATH UILDER ODULES
2 Enter the number corresponding to the group you want to view or modify to
display the Group Configuration Options menu for that group. Figure 98 shows
the E1 UNI Group Configuration Options menu. The DS1 UNI menu is the same.
The options on this menu allow you to access other menus from which you can
configure group parameters or virtual interfaces.
Figure 98 Group Configuration Options Menu
3 Select [1] Group Configuration to display the List/Modify Group menu. Figure 99
shows the DS1 UNI List/Modify Group menu. The E1 UNI menu is the same.
Figure 99 UNI List/Modify Group
4 If the Admin. Status of the group is In Service, select [10] Set Admin. Status and
enter [1] to take the group out of service.
You must take the group out of service before you can modify it.
, P , A
ORTS AND PPLICATIONS