Conventions - 3Com 3C63100-AC-C - PathBuilder S600 Bridge/router Reference Manual

16 A G
BOUT THIS UIDE

Conventions

Table 2 and Table 3 list conventions that are used throughout this guide.
Table 2 Notice Icons
Icon Notice Type
Information note
Caution
Warning
Table 3 Text Conventions
Convention Description
The word "syntax" means you must evaluate the syntax provided and
Syntax
supply the appropriate values. Placeholders for values you must supply
appear in angle brackets. Example:
In this example, you must supply a port number for <port>.
The word "command" means you must enter the command exactly as
Commands
shown in text and press the Return or Enter key. Example:
This guide always gives the full form of a command in uppercase and
lowercase letters. However, you can abbreviate commands by entering
only the uppercase letters and the appropriate value. Commands are
not case-sensitive.
This typeface represents information as it appears on the screen.
Screen displays
The words "enter" When you see the word "enter" in this guide, you must type
and "type" something, and then press the Return or Enter key. Do not press the
Return or Enter key when an instruction simply says "type."
[Key] names Key names appear in text in one of two ways:
n
n
If you must press two or more keys simultaneously, the key names are
linked with a plus sign (+). Example:
Menu commands Menu commands or button names appear in italics. Example:
and buttons
Words in italicized Italics emphasize a point or denote new terms at the place where they
type are defined in the text.
Words in bold-face Bold text denotes key features.
type
Alerts you to...
Important features or instructions
Risk of personal safety, system damage, or loss of data
Risk of severe personal injury
Enable RIPIP by using the following syntax:
SETDefault !<port> -RIPIP CONTrol = Listen
To remove the IP address, enter the following command:
SETDefault !0 -IP NETaddr = 0.0.0.0
Referred to by their labels, such as "the Return key" or "the Escape
key"
Written with brackets, such as [Return] or [Esc].
Press [Ctrl]+[Alt]+[Del].
From the Help menu, select Contents.