Deleting Virtual Interfaces - 3Com 3C63100-AC-C - PathBuilder S600 Bridge/router Reference Manual

120 C 5: C
HAPTER ONFIGURING
Deleting Virtual
Interfaces
P B S600 M
ATH UILDER ODULES
The List/Modify Virtual Interface menu shows a summary of existing virtual
interfaces, with a virtual interface number (VI#) assigned to each. The menu also
displays the following information for each virtual interface:
Rate, in cells per second
n
User-entered description
n
Figure 85 List/Modify Virtual Interface Menu
4 If you want to modify a virtual interface, enter the number corresponding to the
virtual interface which you want to modify to display the Modify Virtual Interface
menu for the selected virtual interface. This menu is the same as the Add Virtual
Interface menu shown earlier in Figure 84.
5 Change the Shaper Rate and/or Description for the virtual interface as desired.
To delete a virtual interface, follow these steps:
1 From the List Card menu, enter the slot number corresponding to the card for
which you want to delete a virtual interface. The configuration menu for that card
appears.
2 Select the Virtual Interfaces option to display the Virtual Interface Configuration
menu. The option number may vary, depending on the card menu, but in most
cases it is [2] Virtual Interfaces.
3 From the Virtual Interface Configuration menu, select [3] Delete Virtual Interface.
The Delete Virtual Interface menu appears. This menu is the same as the
List/Modify Virtual Interfaces menu, shown earlier in Figure 85. It lists the existing
virtual interfaces, with a virtual interface number (VI#) assigned to each.
4 Enter the number corresponding to the virtual interface you want to delete.
5 Enter [Y] in response to the confirmation prompt to delete the virtual interface.
, P , A
ORTS AND PPLICATIONS