b Select [4] Manage IP over ATM. The Manage IP over ATM port selection menu
appears.
c Enter the number corresponding to the Ethernet port for which you want to
configure IP over ATM. The IP over ATM menu for the selected port appears, as
shown in Figure 117.
Figure 117 IP over ATM Menu
2 If desired, view the current IP over ATM configuration.
a select [1] View Setup. Figure 118 shows a representative IP over ATM
Configuration screen.
Figure 118 IP over ATM Configuration Screen
b Press any key to return to the IP over ATM menu.
Configuring the Ethernet Module
155