Specifying General System Information - 3Com 3C63100-AC-C - PathBuilder S600 Bridge/router Reference Manual

104 C 5: C
HAPTER ONFIGURING
Specifying General
System Information
P B S600 M
ATH UILDER ODULES
Figure 70 System Administration Menu
General system information includes the following:
Shelf name—Change the name of the node.
Customer name—Changer or enter the customer name.
Phone number—Change or enter the phone number.
Maintenance contact—Change or enter the maintenance contact.
Location—Change or enter the location.
Auto logout time—Change the logout time (1-99 minutes).
Password—Change the password. The default is
To specify or change general system information, follow these steps:
1 From the System Administration menu, select [1] General System Information to
display the General System Information menu shown in 2. This menu displays the
current system information and provides options that allow you to change the
current settings.
2 Select the option corresponding to the setting you want to change. A prompt
appears at the bottom of the screen.
3 Enter the new setting.
4 Repeat steps 2 and 3 for any other settings you want to change.
5 Select [8] Previous Menu to return to the System Administration menu.
For information about the options related to initial configuration (setting
communication parameters, configuring in-band management, setting the time
and date, and changing the default password), see Chapter 3.
, P , A
ORTS AND PPLICATIONS
.
password