Configuring Control Panel Write Access - 3Com LANPLEX 6000 User Manual

Administration console
Hide thumbs Also See for LANPLEX 6000:
Table of Contents

Advertisement

Configuring
Control Panel
Write Access
Top-Level
Menu
display
system
softwareUpdate
ethernet
baseline
fddi
serialPort
tokenring
password
bridge
name
ip
time
snmp
screenHeight
analyzer
consoleLock
script
panelLock
logout
ctlKeys
nvData
reboot
Disabling Reboot
and Abort Keys
Top-Level Menu
system
display
ethernet
softwareUpdate
fddi
baseline
tokenring
serialPort
bridge
password
ip
name
snmp
time
analyzer
screenHeight
script
consoleLock
logout
panelLock
ctlKeys
nvData
reboot
You can permit or prohibit the modification of system configurations and
MIB parameters from the LANplex system's control panel. See the LANplex
6000 Control Panel User Guide, for more information about the parameters
you can set from the control panel. As shipped, modifications from the
control panel are permitted.
To change the control panel setting:
1 From the top level of the Administration Console, enter:
system panelLock
The current setting is displayed (locked or unlocked).
2 Enter
to configure the opposite of the current setting. Enter
y
the current access setting.
See the following example:
The Control Panel is currently unlocked.
Do you want to lock the Control Panel? (y/n):
As shipped, the Administration Console allows you to use the
[Control]+[X] or [Control]+[C] key combinations within the Console. These
key strokes allow you to reboot the system (Ctl-X) or restart the
Administration Console (Ctl-C). You can change this setting to disable both
of these features.
CAUTION: If you disable the control keys, only use Ctl-C if instructed to by a
Technical Support representative. Using Ctl-C may irregularly terminate a
Console session.
To enable or disable the reboot and abort control keys:
1 From the top level of the Administration Console, enter:
system ctlKeys
You are prompted for whether you want to enable or disable the
functionality as shown below:
Enter new value (disabled,enabled) [enabled]:
2 Enter
or
enabled
Configuring Control Panel Write Access
at the prompt.
disabled
2-13
to maintain
n
y

Advertisement

Table of Contents
loading

Table of Contents