Changing Trunk-To-Trunk Transfer Status - Lucent Technologies MERLIN LEGEND Release 6.1 System Manager's Manual

MERLIN LEGEND Communications System Release 6.1
System Manager's Guide 555-661-118
6 Managing the System

Changing Trunk-to-Trunk Transfer Status

2. In Release 3.1 and later systems, ports programmed for voice
Valid Entries
Unrestricted, Outward-restricted, Toll-restricted
Task List: Changing Calling Restrictions
Obtain the following forms, as appropriate:
— 6g, Call Restriction Assignments and Lists
— 6e, Allowed Lists
— 6f, Disallowed Lists
— Forms for individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c
If necessary, read "Calling Restrictions" in the Feature Reference for
detailed information about this feature.
Plan changes using the planning guidelines above; record the new values
on the form(s).
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for "Call Restrictions" in
the "Optional Telephone Features" section of System Programming ,
Chapter 3, or the summary programming instructions below.
When you have finished, file the form(s) with the rest of the planning forms.
Programming Instructions
Console Procedure
PC Procedure
Changing Trunk-to-Trunk
Transfer Status
Beginning with Release 3.1, the system includes an option to allow or disallow
trunk-to-trunk transfer for each extension. Trunk-to-trunk transfer is the
transferring of an outside call to another outside number. When trunk-to-trunk
transfer is allowed, there is a risk of toll fraud.
messaging systems (VMI ports) are factory-set as outward-restricted.
To permit outcalling from a voice messaging system, you must change
this restriction.
Select restriction
6
6
Dial ext. no.
Type ext. no.
6
Issue 1
August 1998
Page 6-47
Select restriction